Comparison of Two-Dimensional Transition Metal Dichalcogenides for Electrochemical Supercapacitors

M.A. Bissett, S.D. Worrall, I.A. Kinloch, R.A.W. Dryfe

Research output: Contribution to journalArticle

Abstract

Layered two-dimensional (2D) materials such as transition metal dichalcogenides (TMDCs) are receiving increased interest for applications in energy storage due to their high specific surface area and versatile electronic structure. In this work, we prepare solvent stabilised dispersions of a variety of few-layer thick TMDC crystals (MoS2, MoSe2, WS2, and TiS2) by ultrasonication. The exfoliated materials were first characterised by a variety of techniques to determine their quality. These dispersions were then used to form supercapacitor electrodes by filtration, without use of any further conductive additives or polymeric binders. These thin layer TMDC electrodes were assembled into symmetrical coin-cell devices for comparative electrochemical testing. It was found that despite being the most widely studied material, MoS2 suffers from inferior charge storage properties compared to the much higher conductivity and lower density TiS2. Impedance spectroscopy was used to investigate the charge storage mechanisms inside the coin cells, which were found to consist of a combination of both rapid, but low magnitude, electric double layer capacitance and much slower, but higher magnitude, ion adsorption pseudocapacitance.
Original languageEnglish
Pages (from-to)30-37
JournalElectrochimica Acta
Volume201
DOIs
Publication statusPublished - 20 May 2016

Bibliographical note

©2016 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).

Fingerprint Dive into the research topics of 'Comparison of Two-Dimensional Transition Metal Dichalcogenides for Electrochemical Supercapacitors'. Together they form a unique fingerprint.

  • Cite this