Cost effective greenhouse gas reductions in the steel industry from an Organic Rankine Cycle

C. Walsh, P. Thornley

Research output: Contribution to journalConference article

Abstract

Large quantities of low grade heat (LGH) are generated within many process industries, and the recovery of LGH is a potentially significant means of improving process efficiency, but it is often difficult to find an appropriate internal heat load. One alternative is to use appropriate technologies to convert the low grade heat to electricity for use on site. This paper describes the environmental and techno-economic evaluation of a case study examining the potential application of an Organic Rankine Cycle (ORC) to generate electricity from LGH from the stacks of a coke oven used in steel production. 21 MW of LGH was available for recovery at the plant and resource accounting and lifecycle analysis methods were used to evaluate the environmental and economic benefits of the operation of an ORC. The results showed that between 1 and 3% of the CO(2) emitted directly through the production of coke would be offset by installation of an ORC, with lifecycle environmental impacts of coke production reduced by less than 1 %, although this was sufficient to offset over 10,000 t CO(2) annually. However, the amount of electricity generated was sufficient to replace all currently imported electricity and economic analysis indicated a relatively attractive discounted payback period of between 3 and 6 years, suggesting this may be a commercially viable option, which could present a relatively cost effective method of achieving greenhouse gas savings in the process industries.
Original languageEnglish
Pages (from-to)905-910
JournalChemical Engineering Transactions
Volume25
DOIs
Publication statusPublished - Jan 2011

Fingerprint

Rankine cycle
Iron and steel industry
Greenhouse gases
Electricity
Costs
Carbon Monoxide
Coke
Recovery
Coke ovens
Economics
Steel
Economic analysis
Thermal load
Environmental impact
Industry
Hot Temperature

Bibliographical note

© 2011 AIDIC Servizi Srl

Cite this

@article{c683120a454b4db995007549779063c0,
title = "Cost effective greenhouse gas reductions in the steel industry from an Organic Rankine Cycle",
abstract = "Large quantities of low grade heat (LGH) are generated within many process industries, and the recovery of LGH is a potentially significant means of improving process efficiency, but it is often difficult to find an appropriate internal heat load. One alternative is to use appropriate technologies to convert the low grade heat to electricity for use on site. This paper describes the environmental and techno-economic evaluation of a case study examining the potential application of an Organic Rankine Cycle (ORC) to generate electricity from LGH from the stacks of a coke oven used in steel production. 21 MW of LGH was available for recovery at the plant and resource accounting and lifecycle analysis methods were used to evaluate the environmental and economic benefits of the operation of an ORC. The results showed that between 1 and 3{\%} of the CO(2) emitted directly through the production of coke would be offset by installation of an ORC, with lifecycle environmental impacts of coke production reduced by less than 1 {\%}, although this was sufficient to offset over 10,000 t CO(2) annually. However, the amount of electricity generated was sufficient to replace all currently imported electricity and economic analysis indicated a relatively attractive discounted payback period of between 3 and 6 years, suggesting this may be a commercially viable option, which could present a relatively cost effective method of achieving greenhouse gas savings in the process industries.",
author = "C. Walsh and P. Thornley",
note = "{\circledC} 2011 AIDIC Servizi Srl",
year = "2011",
month = "1",
doi = "10.3303/CET1125151",
language = "English",
volume = "25",
pages = "905--910",
journal = "Chemical Engineering Transactions",
issn = "2283-9216",
publisher = "AIDIC-Italian Association of Chemical Engineering",

}

Cost effective greenhouse gas reductions in the steel industry from an Organic Rankine Cycle. / Walsh, C.; Thornley, P.

In: Chemical Engineering Transactions, Vol. 25, 01.2011, p. 905-910.

Research output: Contribution to journalConference article

TY - JOUR

T1 - Cost effective greenhouse gas reductions in the steel industry from an Organic Rankine Cycle

AU - Walsh, C.

AU - Thornley, P.

N1 - © 2011 AIDIC Servizi Srl

PY - 2011/1

Y1 - 2011/1

N2 - Large quantities of low grade heat (LGH) are generated within many process industries, and the recovery of LGH is a potentially significant means of improving process efficiency, but it is often difficult to find an appropriate internal heat load. One alternative is to use appropriate technologies to convert the low grade heat to electricity for use on site. This paper describes the environmental and techno-economic evaluation of a case study examining the potential application of an Organic Rankine Cycle (ORC) to generate electricity from LGH from the stacks of a coke oven used in steel production. 21 MW of LGH was available for recovery at the plant and resource accounting and lifecycle analysis methods were used to evaluate the environmental and economic benefits of the operation of an ORC. The results showed that between 1 and 3% of the CO(2) emitted directly through the production of coke would be offset by installation of an ORC, with lifecycle environmental impacts of coke production reduced by less than 1 %, although this was sufficient to offset over 10,000 t CO(2) annually. However, the amount of electricity generated was sufficient to replace all currently imported electricity and economic analysis indicated a relatively attractive discounted payback period of between 3 and 6 years, suggesting this may be a commercially viable option, which could present a relatively cost effective method of achieving greenhouse gas savings in the process industries.

AB - Large quantities of low grade heat (LGH) are generated within many process industries, and the recovery of LGH is a potentially significant means of improving process efficiency, but it is often difficult to find an appropriate internal heat load. One alternative is to use appropriate technologies to convert the low grade heat to electricity for use on site. This paper describes the environmental and techno-economic evaluation of a case study examining the potential application of an Organic Rankine Cycle (ORC) to generate electricity from LGH from the stacks of a coke oven used in steel production. 21 MW of LGH was available for recovery at the plant and resource accounting and lifecycle analysis methods were used to evaluate the environmental and economic benefits of the operation of an ORC. The results showed that between 1 and 3% of the CO(2) emitted directly through the production of coke would be offset by installation of an ORC, with lifecycle environmental impacts of coke production reduced by less than 1 %, although this was sufficient to offset over 10,000 t CO(2) annually. However, the amount of electricity generated was sufficient to replace all currently imported electricity and economic analysis indicated a relatively attractive discounted payback period of between 3 and 6 years, suggesting this may be a commercially viable option, which could present a relatively cost effective method of achieving greenhouse gas savings in the process industries.

UR - http://www.scopus.com/inward/record.url?eid=2-s2.0-79956258283&partnerID=MN8TOARS

U2 - 10.3303/CET1125151

DO - 10.3303/CET1125151

M3 - Conference article

VL - 25

SP - 905

EP - 910

JO - Chemical Engineering Transactions

JF - Chemical Engineering Transactions

SN - 2283-9216

ER -