Geotechnical Performance of Suction Caisson Installation in Multi-layered Seabed Profiles

M. Mehravar, O. Harireche, A. Faramarzi

Research output: Chapter in Book/Published conference outputConference publication


Suction caissons consist of large cylindrical buckets made from steel. In order to serve as foundations for various offshore structures, suction caissons are pushed into the seabed under pressure differential exerted on their lid by an imposed suction. Despite their wide use in the oil and gas industry, there are still some uncertainties regarding their installation process as a result of changes in seabed profiles such as the existence of low permeability layers as well as the variation in soil properties with depth (e.g. permeability decreasing with depth due to an increase in soil density). It is known that seepage conditions play a pivotal role in the installation process, particularly in sand. Indeed, pressure gradients generated by the imposed suction inside the caisson cavity cause an overall reduction in the soil resistance around the caisson wall and at caisson tip, thereby assisting the penetration into the seabed. Successful installation of caisson foundations relies on accurate prediction of soil conditions, in particular soil shear resistance during the installation. Existing knowledge of the prediction of soil conditions and required suction during caisson installation has some limitations which often resulted into rather conservative design methods. Most design procedures used to control suction during caisson installation assume an isotropic and homogenous seabed profile. Moreover, the actual variation of pressure gradient around the caisson wall at different penetration depths is often ignored, although it significantly affects soil resistance. Natural seabed can possess a heterogeneous property where it may comprise of different layers of soils including the presence of layers with low-permeability i.e. clay or silt. In this paper, the effect of seepage on soil conditions during caisson installation is studied within the frame of the presence of a substratum that consists of silt. Suction induced seepage described throughout the installation process and its effects on frictional and tip resistance are considered. For this purpose, a numerical simulation is conducted on a normalised geometry of the suction caisson and surrounding soil, at different penetration depths. The distribution of pressure gradient on both inside and outside of the caisson wall is taken into consideration in both soil shear and tip resistance. Particular conclusions will be drawn on the implications of the presence of a low permeability silt layer on caisson installation.
Original languageEnglish
Title of host publicationInternational Symposium on Energy Geotechnics
ISBN (Electronic)978-3-319-99670-7
ISBN (Print)978-3-319-99669-1
Publication statusPublished - 24 Aug 2018
EventInternational Symposium on Energy Geotechnics: SEG-2018 - Lausanne, Switzerland
Duration: 25 Sept 201828 Sept 2018

Publication series

NameEnergy Geotechnics
ISSN (Print)1866-8755
ISSN (Electronic)1866-8763


ConferenceInternational Symposium on Energy Geotechnics

Bibliographical note

© Springer Nature B.V. 20XX. The final publication is available at Springer via


Dive into the research topics of 'Geotechnical Performance of Suction Caisson Installation in Multi-layered Seabed Profiles'. Together they form a unique fingerprint.

Cite this