Skip to main navigation Skip to search Skip to main content

New data format for fibreoptic dense wavelength-division-multiplexing communication links

  • M. V. Lysakova*
  • , M.P. Fedoruk
  • , S. K. Turitsyn
  • , E. G. Shapiro
  • *Corresponding author for this work
  • Institute of Automation and Electrometry SB RAS
  • Institute for Computational Technologies
  • Novosibirsk State University

Research output: Contribution to journalArticlepeer-review

Abstract

A flat-top format is proposed for the transmission of digital signals with the sinc-shaped profile of a single pulse resonantly located along several bit intervals. Due to a rapid decrease of the spectral power, such a format reduces the interaction between two adjacent frequency channels. Numerical simulation showed the possibility of error-free transmission at a rate of 40 Gbit s -1 over 1200 km in the link with the 0.8-bit s-1 Hz -1 spectral efficiency without using polarisation wavelength-division multiplexing.

Original languageEnglish
Pages (from-to)857-859
Number of pages3
JournalQuantum Electronics
Volume34
Issue number9
DOIs
Publication statusPublished - 1 Sept 2004

Keywords

  • Digital signal transfer format
  • Fibreoptic communication links
  • Fibres for data transfer
  • Frequency channels
  • Wavelength-division multiplexing

Fingerprint

Dive into the research topics of 'New data format for fibreoptic dense wavelength-division-multiplexing communication links'. Together they form a unique fingerprint.

Cite this