Nuclear fuel cycle, with a liquid ore and fuel: toward renewable energy

Claude Degueldre, Richard James Dawson, Vesna Najdanovic-Visak

Research output: Contribution to journalArticle

Abstract

To fulfill the conditions required for a nuclear renewable energy concept, one has to explore a combination of processes going from the front end of the nuclear fuel cycle to the fuel production and the energy conversion using specific fluid fuels and reactors. Extraction of uranium from a diluted fluid ore such as seawater has been studied in various countries worldwide. This extraction should be carried out parsimoniously. An extraction rate of 103 tons of U per year over centuries would not modify significantly the equilibrium concentration of uranium in the oceans (3.3 ppb). This equilibrium results from the input of 104 tons of U per year by river waters and its scavenging on the sea floor from the 1.37 × 1018 tons of water in the oceans. For a renewable uranium extraction, the use of a specific biomass material is suggested to adsorb uranium and subsequently other transition metals. The uranium loading on the biomass would be around 100 mg per kg. After contact time, the loaded material would be dried and burned (CO2 neutral) with heat conversion into electricity. The uranium ‘burning’ in a molten salt fast reactor helps to optimize the energy conversion by burning all actinide isotopes with an excellent yield for producing a maximum amount of thermal energy from fission and converting it into electricity. This optimisation can be reached by reducing the moderation and the fission product concentration in the liquid fuel/coolant. These effects can be achieved by using a maximum amount of actinides and a minimum amount of alkaline/earth alkaline elements yielding a harder neutron spectrum. Under these optimal conditions the consumption of natural uranium would be 7 tons per year and per gigawatt (GW) of produced electricity. The coupling of uranium extraction from the sea and its optimal utilisation in a molten salt fast reactor should allow nuclear energy to gain the label renewable. In addition, the amount of seawater used by a nuclear power plant to cool the last coolant fluid and the turbine would be ∼2.1 × 109 tons per year for a fast molten salt reactor, corresponding to 7 tons of natural uranium extractable per year. This practice justifies the label renewable.
Original languageEnglish
Pages (from-to)1693-1700
Number of pages8
JournalSustainable Energy and Fuels
Volume3
Issue number7
Early online date27 Mar 2019
DOIs
Publication statusPublished - 1 Jul 2019

Fingerprint

Nuclear fuels
Uranium
Ores
Liquids
Electricity
Fast reactors
Actinides
Seawater
Energy conversion
Coolants
Fluids
Molten materials
Labels
Biomass
Salts
Fission products
Scavenging
Liquid fuels
Thermal energy
Nuclear energy

Bibliographical note

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence.

Cite this

Degueldre, C., Dawson, R. J., & Najdanovic-Visak, V. (2019). Nuclear fuel cycle, with a liquid ore and fuel: toward renewable energy. Sustainable Energy and Fuels, 3(7), 1693-1700. https://doi.org/10.1039/C8SE00610E
Degueldre, Claude ; Dawson, Richard James ; Najdanovic-Visak, Vesna. / Nuclear fuel cycle, with a liquid ore and fuel : toward renewable energy. In: Sustainable Energy and Fuels. 2019 ; Vol. 3, No. 7. pp. 1693-1700.
@article{152d249374f3493abdf0daa47fabdcd7,
title = "Nuclear fuel cycle, with a liquid ore and fuel: toward renewable energy",
abstract = "To fulfill the conditions required for a nuclear renewable energy concept, one has to explore a combination of processes going from the front end of the nuclear fuel cycle to the fuel production and the energy conversion using specific fluid fuels and reactors. Extraction of uranium from a diluted fluid ore such as seawater has been studied in various countries worldwide. This extraction should be carried out parsimoniously. An extraction rate of 103 tons of U per year over centuries would not modify significantly the equilibrium concentration of uranium in the oceans (3.3 ppb). This equilibrium results from the input of 104 tons of U per year by river waters and its scavenging on the sea floor from the 1.37 × 1018 tons of water in the oceans. For a renewable uranium extraction, the use of a specific biomass material is suggested to adsorb uranium and subsequently other transition metals. The uranium loading on the biomass would be around 100 mg per kg. After contact time, the loaded material would be dried and burned (CO2 neutral) with heat conversion into electricity. The uranium ‘burning’ in a molten salt fast reactor helps to optimize the energy conversion by burning all actinide isotopes with an excellent yield for producing a maximum amount of thermal energy from fission and converting it into electricity. This optimisation can be reached by reducing the moderation and the fission product concentration in the liquid fuel/coolant. These effects can be achieved by using a maximum amount of actinides and a minimum amount of alkaline/earth alkaline elements yielding a harder neutron spectrum. Under these optimal conditions the consumption of natural uranium would be 7 tons per year and per gigawatt (GW) of produced electricity. The coupling of uranium extraction from the sea and its optimal utilisation in a molten salt fast reactor should allow nuclear energy to gain the label renewable. In addition, the amount of seawater used by a nuclear power plant to cool the last coolant fluid and the turbine would be ∼2.1 × 109 tons per year for a fast molten salt reactor, corresponding to 7 tons of natural uranium extractable per year. This practice justifies the label renewable.",
author = "Claude Degueldre and Dawson, {Richard James} and Vesna Najdanovic-Visak",
note = "This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence.",
year = "2019",
month = "7",
day = "1",
doi = "10.1039/C8SE00610E",
language = "English",
volume = "3",
pages = "1693--1700",
number = "7",

}

Degueldre, C, Dawson, RJ & Najdanovic-Visak, V 2019, 'Nuclear fuel cycle, with a liquid ore and fuel: toward renewable energy', Sustainable Energy and Fuels, vol. 3, no. 7, pp. 1693-1700. https://doi.org/10.1039/C8SE00610E

Nuclear fuel cycle, with a liquid ore and fuel : toward renewable energy. / Degueldre, Claude; Dawson, Richard James; Najdanovic-Visak, Vesna.

In: Sustainable Energy and Fuels, Vol. 3, No. 7, 01.07.2019, p. 1693-1700.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Nuclear fuel cycle, with a liquid ore and fuel

T2 - toward renewable energy

AU - Degueldre, Claude

AU - Dawson, Richard James

AU - Najdanovic-Visak, Vesna

N1 - This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence.

PY - 2019/7/1

Y1 - 2019/7/1

N2 - To fulfill the conditions required for a nuclear renewable energy concept, one has to explore a combination of processes going from the front end of the nuclear fuel cycle to the fuel production and the energy conversion using specific fluid fuels and reactors. Extraction of uranium from a diluted fluid ore such as seawater has been studied in various countries worldwide. This extraction should be carried out parsimoniously. An extraction rate of 103 tons of U per year over centuries would not modify significantly the equilibrium concentration of uranium in the oceans (3.3 ppb). This equilibrium results from the input of 104 tons of U per year by river waters and its scavenging on the sea floor from the 1.37 × 1018 tons of water in the oceans. For a renewable uranium extraction, the use of a specific biomass material is suggested to adsorb uranium and subsequently other transition metals. The uranium loading on the biomass would be around 100 mg per kg. After contact time, the loaded material would be dried and burned (CO2 neutral) with heat conversion into electricity. The uranium ‘burning’ in a molten salt fast reactor helps to optimize the energy conversion by burning all actinide isotopes with an excellent yield for producing a maximum amount of thermal energy from fission and converting it into electricity. This optimisation can be reached by reducing the moderation and the fission product concentration in the liquid fuel/coolant. These effects can be achieved by using a maximum amount of actinides and a minimum amount of alkaline/earth alkaline elements yielding a harder neutron spectrum. Under these optimal conditions the consumption of natural uranium would be 7 tons per year and per gigawatt (GW) of produced electricity. The coupling of uranium extraction from the sea and its optimal utilisation in a molten salt fast reactor should allow nuclear energy to gain the label renewable. In addition, the amount of seawater used by a nuclear power plant to cool the last coolant fluid and the turbine would be ∼2.1 × 109 tons per year for a fast molten salt reactor, corresponding to 7 tons of natural uranium extractable per year. This practice justifies the label renewable.

AB - To fulfill the conditions required for a nuclear renewable energy concept, one has to explore a combination of processes going from the front end of the nuclear fuel cycle to the fuel production and the energy conversion using specific fluid fuels and reactors. Extraction of uranium from a diluted fluid ore such as seawater has been studied in various countries worldwide. This extraction should be carried out parsimoniously. An extraction rate of 103 tons of U per year over centuries would not modify significantly the equilibrium concentration of uranium in the oceans (3.3 ppb). This equilibrium results from the input of 104 tons of U per year by river waters and its scavenging on the sea floor from the 1.37 × 1018 tons of water in the oceans. For a renewable uranium extraction, the use of a specific biomass material is suggested to adsorb uranium and subsequently other transition metals. The uranium loading on the biomass would be around 100 mg per kg. After contact time, the loaded material would be dried and burned (CO2 neutral) with heat conversion into electricity. The uranium ‘burning’ in a molten salt fast reactor helps to optimize the energy conversion by burning all actinide isotopes with an excellent yield for producing a maximum amount of thermal energy from fission and converting it into electricity. This optimisation can be reached by reducing the moderation and the fission product concentration in the liquid fuel/coolant. These effects can be achieved by using a maximum amount of actinides and a minimum amount of alkaline/earth alkaline elements yielding a harder neutron spectrum. Under these optimal conditions the consumption of natural uranium would be 7 tons per year and per gigawatt (GW) of produced electricity. The coupling of uranium extraction from the sea and its optimal utilisation in a molten salt fast reactor should allow nuclear energy to gain the label renewable. In addition, the amount of seawater used by a nuclear power plant to cool the last coolant fluid and the turbine would be ∼2.1 × 109 tons per year for a fast molten salt reactor, corresponding to 7 tons of natural uranium extractable per year. This practice justifies the label renewable.

UR - http://www.scopus.com/inward/record.url?scp=85068149263&partnerID=8YFLogxK

UR - https://pubs.rsc.org/en/content/articlelanding/2019/SE/C8SE00610E#!divAbstract

U2 - 10.1039/C8SE00610E

DO - 10.1039/C8SE00610E

M3 - Article

VL - 3

SP - 1693

EP - 1700

IS - 7

ER -