Raman gain and random distributed feedback generation in nitrogen doped silica core fiber

Alexey V. Lanin; Dmitry V. Churkin; Konstantin M. Golant; Sergei Turitsyn

doi:10.1109/CLEOE-IQEC.2013.6801355

Raman gain and random distributed feedback generation in nitrogen doped silica core fiber

Alexey V. Lanin
, Dmitry V. Churkin
, Konstantin M. Golant
, Sergei Turitsyn

Kotel'nikov Institute of Radio Engineering and Electronics of Russian Academy of Sciences
Novosibirsk State University

Research output: Chapter in Book/Published conference output › Conference publication

1 Citation (Scopus)

Abstract

Recently, the concept of a random distributed feedback (DFB) lasing in optical fibers has been demonstrated [1], A number of different random DFB fiber lasers has been demonstrated so far including tunable, multiwalength, cascaded generation, generation in different spectral bands etc [2-7]. All systems are based on standard low-loss germanium doped silica core fibres having relatively low Rayleigh scattering coefficient. Thus, the typical length of random DFB fiber lasers is in the range from several kilometres to tens of kilometres to accumulate enough random feedback. Here we demonstrate for the first time to our knowledge the random DFB fiber laser based on a nitrogen doped silica core (N-doped) fiber. The fiber has several times higher Rayleigh scattering coefficient compared to standard telecommunication fibres. Thus, the generation is achieved in 500 meters long fiber only.

Original language	English
Title of host publication	2013 Conference on Lasers and Electro-Optics Europe & International Quantum Electronics Conference
Place of Publication	Piscataway, NJ (US)
Publisher	IEEE
Number of pages	1
ISBN (Print)	978-1-4799-0593-5, 978-1-4799-0594-2
DOIs	https://doi.org/10.1109/CLEOE-IQEC.2013.6801355
Publication status	Published - 2013
Event	2013 Conference on Lasers and Electro-Optics Europe / International Quantum Electronics Conference - Munich, Germany Duration: 12 May 2013 → 16 May 2013

Conference

Conference	2013 Conference on Lasers and Electro-Optics Europe / International Quantum Electronics Conference
Abbreviated title	CLEO EUROPE/IQEC 2013
Country/Territory	Germany
City	Munich
Period	12/05/13 → 16/05/13

Access to Document

10.1109/CLEOE-IQEC.2013.6801355

Cite this

@inproceedings{47ae41dfb6644cdd9bfb81549bb7248e,

title = "Raman gain and random distributed feedback generation in nitrogen doped silica core fiber",

abstract = "Recently, the concept of a random distributed feedback (DFB) lasing in optical fibers has been demonstrated [1], A number of different random DFB fiber lasers has been demonstrated so far including tunable, multiwalength, cascaded generation, generation in different spectral bands etc [2-7]. All systems are based on standard low-loss germanium doped silica core fibres having relatively low Rayleigh scattering coefficient. Thus, the typical length of random DFB fiber lasers is in the range from several kilometres to tens of kilometres to accumulate enough random feedback. Here we demonstrate for the first time to our knowledge the random DFB fiber laser based on a nitrogen doped silica core (N-doped) fiber. The fiber has several times higher Rayleigh scattering coefficient compared to standard telecommunication fibres. Thus, the generation is achieved in 500 meters long fiber only.",

author = "Lanin, \{Alexey V.\} and Churkin, \{Dmitry V.\} and Golant, \{Konstantin M.\} and Sergei Turitsyn",

year = "2013",

doi = "10.1109/CLEOE-IQEC.2013.6801355",

language = "English",

isbn = "978-1-4799-0593-5",

booktitle = "2013 Conference on Lasers and Electro-Optics Europe \& International Quantum Electronics Conference",

publisher = "IEEE",

address = "United States",

note = "2013 Conference on Lasers and Electro-Optics Europe / International Quantum Electronics Conference, CLEO EUROPE/IQEC 2013 ; Conference date: 12-05-2013 Through 16-05-2013",

}

Lanin, AV, Churkin, DV, Golant, KM & Turitsyn, S 2013, Raman gain and random distributed feedback generation in nitrogen doped silica core fiber. in 2013 Conference on Lasers and Electro-Optics Europe & International Quantum Electronics Conference. IEEE, Piscataway, NJ (US), 2013 Conference on Lasers and Electro-Optics Europe / International Quantum Electronics Conference, Munich, Germany, 12/05/13. https://doi.org/10.1109/CLEOE-IQEC.2013.6801355

Raman gain and random distributed feedback generation in nitrogen doped silica core fiber. / Lanin, Alexey V.; Churkin, Dmitry V.; Golant, Konstantin M. et al.
2013 Conference on Lasers and Electro-Optics Europe & International Quantum Electronics Conference. Piscataway, NJ (US): IEEE, 2013.

Research output: Chapter in Book/Published conference output › Conference publication

TY - GEN

T1 - Raman gain and random distributed feedback generation in nitrogen doped silica core fiber

AU - Lanin, Alexey V.

AU - Churkin, Dmitry V.

AU - Golant, Konstantin M.

AU - Turitsyn, Sergei

PY - 2013

Y1 - 2013

N2 - Recently, the concept of a random distributed feedback (DFB) lasing in optical fibers has been demonstrated [1], A number of different random DFB fiber lasers has been demonstrated so far including tunable, multiwalength, cascaded generation, generation in different spectral bands etc [2-7]. All systems are based on standard low-loss germanium doped silica core fibres having relatively low Rayleigh scattering coefficient. Thus, the typical length of random DFB fiber lasers is in the range from several kilometres to tens of kilometres to accumulate enough random feedback. Here we demonstrate for the first time to our knowledge the random DFB fiber laser based on a nitrogen doped silica core (N-doped) fiber. The fiber has several times higher Rayleigh scattering coefficient compared to standard telecommunication fibres. Thus, the generation is achieved in 500 meters long fiber only.

AB - Recently, the concept of a random distributed feedback (DFB) lasing in optical fibers has been demonstrated [1], A number of different random DFB fiber lasers has been demonstrated so far including tunable, multiwalength, cascaded generation, generation in different spectral bands etc [2-7]. All systems are based on standard low-loss germanium doped silica core fibres having relatively low Rayleigh scattering coefficient. Thus, the typical length of random DFB fiber lasers is in the range from several kilometres to tens of kilometres to accumulate enough random feedback. Here we demonstrate for the first time to our knowledge the random DFB fiber laser based on a nitrogen doped silica core (N-doped) fiber. The fiber has several times higher Rayleigh scattering coefficient compared to standard telecommunication fibres. Thus, the generation is achieved in 500 meters long fiber only.

UR - https://www.scopus.com/pages/publications/84900335038

U2 - 10.1109/CLEOE-IQEC.2013.6801355

DO - 10.1109/CLEOE-IQEC.2013.6801355

M3 - Conference publication

AN - SCOPUS:84898745857

SN - 978-1-4799-0593-5

SN - 978-1-4799-0594-2

BT - 2013 Conference on Lasers and Electro-Optics Europe & International Quantum Electronics Conference

PB - IEEE

CY - Piscataway, NJ (US)

T2 - 2013 Conference on Lasers and Electro-Optics Europe / International Quantum Electronics Conference

Y2 - 12 May 2013 through 16 May 2013

ER -

Raman gain and random distributed feedback generation in nitrogen doped silica core fiber

Abstract

Conference

Access to Document

Other files and links

Fingerprint

Blue-to-red tunable SHG from a diode-pumped PPKTP waveguide

Control of the properties of micro-structured waveguides in LiNbO₃ fabricated by direct femtosecond laser inscription

First order optical differentiator based on an FBG in transmission

Cite this

Raman gain and random distributed feedback generation in nitrogen doped silica core fiber

Abstract

Conference

Access to Document

Other files and links

Fingerprint

Research output

Blue-to-red tunable SHG from a diode-pumped PPKTP waveguide

Control of the properties of micro-structured waveguides in LiNbO3 fabricated by direct femtosecond laser inscription

First order optical differentiator based on an FBG in transmission

Cite this

Control of the properties of micro-structured waveguides in LiNbO₃ fabricated by direct femtosecond laser inscription