Optical link design for minimum power consumption and maximum capacity

N.J. Doran; A.D. Ellis

doi:10.1049/cp.2013.1629

Optical link design for minimum power consumption and maximum capacity

N.J. Doran, A.D. Ellis

Aston Institute of Photonic Technologies (AiPT)

Research output: Chapter in Book/Published conference output › Conference publication

Abstract

Using a well-established analytic nonlinear signal-to-noise ratio noise model we show that there are very simple, fibre independent, amplifier gains which minimize the total energy requirement for amplified systems. Power savings of over 50% are shown to be possible by choosing appropriate amplifier gain and output power.

Original language	English
Title of host publication	39th European Conference and exhibition on Optical Communication (ECOC 2013)
Publisher	IET
Pages	1068-1070
Number of pages	3
ISBN (Print)	978-1-84919-759-5
DOIs	https://doi.org/10.1049/cp.2013.1629
Publication status	Published - 2013
Event	39th European Conference and exhibition on Optical Communication - London, United Kingdom Duration: 22 Sept 2013 → 26 Sept 2013

Publication series

Name	IET conference publications
Publisher	IET
Volume	622

Conference

Conference	39th European Conference and exhibition on Optical Communication
Abbreviated title	ECOC 2013
Country/Territory	United Kingdom
City	London
Period	22/09/13 → 26/09/13

Bibliographical note

This paper is a postprint of a paper submitted to and accepted for publication in IET conference publications and is subject to Institution of Engineering and Technology Copyright. The copy of record is available at IET Digital Library.

Funding: European Communities 7th Framework Programme FP/2007-2013 grant 258033 (MODE-GAP) and the EPSRC funded project UNLOC (grant number EP/J017582/1).

Access to Document

10.1049/cp.2013.1629

Optical Link Design for Minimum Power Consumption
This paper is a postprint of a paper submitted to and accepted for publication in IET conference publications and is subject to Institution of Engineering and Technology Copyright. The copy of record is available at IET Digital Library.
Accepted author manuscript, 205 KB

http://digital-library.theiet.org/content/conferences/10.1049/cp.2013.1629

Cite this

@inproceedings{8d2e910572b84f7daf9d422df47e508d,

title = "Optical link design for minimum power consumption and maximum capacity",

abstract = "Using a well-established analytic nonlinear signal-to-noise ratio noise model we show that there are very simple, fibre independent, amplifier gains which minimize the total energy requirement for amplified systems. Power savings of over 50% are shown to be possible by choosing appropriate amplifier gain and output power.",

author = "N.J. Doran and A.D. Ellis",

note = "This paper is a postprint of a paper submitted to and accepted for publication in IET conference publications and is subject to Institution of Engineering and Technology Copyright. The copy of record is available at IET Digital Library. Funding: European Communities 7th Framework Programme FP/2007-2013 grant 258033 (MODE-GAP) and the EPSRC funded project UNLOC (grant number EP/J017582/1).; 39th European Conference and exhibition on Optical Communication, ECOC 2013 ; Conference date: 22-09-2013 Through 26-09-2013",

year = "2013",

doi = "10.1049/cp.2013.1629",

language = "English",

isbn = "978-1-84919-759-5",

series = "IET conference publications",

publisher = "IET",

pages = "1068--1070",

booktitle = "39th European Conference and exhibition on Optical Communication (ECOC 2013)",

address = "United Kingdom",

}

Doran, NJ & Ellis, AD 2013, Optical link design for minimum power consumption and maximum capacity. in 39th European Conference and exhibition on Optical Communication (ECOC 2013). IET conference publications, vol. 622, IET, pp. 1068-1070, 39th European Conference and exhibition on Optical Communication, London, United Kingdom, 22/09/13. https://doi.org/10.1049/cp.2013.1629

TY - GEN

T1 - Optical link design for minimum power consumption and maximum capacity

AU - Doran, N.J.

AU - Ellis, A.D.

N1 - This paper is a postprint of a paper submitted to and accepted for publication in IET conference publications and is subject to Institution of Engineering and Technology Copyright. The copy of record is available at IET Digital Library. Funding: European Communities 7th Framework Programme FP/2007-2013 grant 258033 (MODE-GAP) and the EPSRC funded project UNLOC (grant number EP/J017582/1).

PY - 2013

Y1 - 2013

N2 - Using a well-established analytic nonlinear signal-to-noise ratio noise model we show that there are very simple, fibre independent, amplifier gains which minimize the total energy requirement for amplified systems. Power savings of over 50% are shown to be possible by choosing appropriate amplifier gain and output power.

AB - Using a well-established analytic nonlinear signal-to-noise ratio noise model we show that there are very simple, fibre independent, amplifier gains which minimize the total energy requirement for amplified systems. Power savings of over 50% are shown to be possible by choosing appropriate amplifier gain and output power.

UR - http://www.scopus.com/inward/record.url?scp=84893357162&partnerID=8YFLogxK

U2 - 10.1049/cp.2013.1629

DO - 10.1049/cp.2013.1629

M3 - Conference publication

AN - SCOPUS:84893357162

SN - 978-1-84919-759-5

T3 - IET conference publications

SP - 1068

EP - 1070

BT - 39th European Conference and exhibition on Optical Communication (ECOC 2013)

PB - IET

T2 - 39th European Conference and exhibition on Optical Communication

Y2 - 22 September 2013 through 26 September 2013

ER -

Optical link design for minimum power consumption and maximum capacity

Abstract

Publication series

Conference

Bibliographical note

Access to Document

Other files and links

Fingerprint

300-mW average output power hybrid mode-locked thulium-doped fiber laser

Comparison of numerical bit error rate estimation methods in 112Gbs QPSK CO-OFDM transmission

Cost-effective broadband GaAs IQ modulator array for long-reach OFDM-PONs

Cite this