Poor fluorinated graphene sheets carboxymethylcellulose polymer composite mode locker for erbium doped fiber laser

Chengbo Mou; Raz Arif; Anatoly S. Lobach; Dmitry V. Khudyakov; Nataliya G. Spitsina; Valery A. Kazakov; Sergei Turitsyn; Alex Rozhin

doi:10.1063/1.4908057

Poor fluorinated graphene sheets carboxymethylcellulose polymer composite mode locker for erbium doped fiber laser

Chengbo Mou^*, Raz Arif, Anatoly S. Lobach, Dmitry V. Khudyakov, Nataliya G. Spitsina, Valery A. Kazakov, Sergei Turitsyn, Alex Rozhin

^*Corresponding author for this work

Aston Institute of Photonic Technologies (AiPT)

Research output: Contribution to journal › Article › peer-review

Abstract

We report poor fluorinated graphene sheets produced by thermal exfoliation embedding in carboxymethylcellulose polymer composite (GCMC) as an efficient mode locker for erbium doped fiber laser. Two GCMC mode lockers with different concentration have been fabricated. The GCMC based mode locked fiber laser shows stable soliton output pulse shaping with repetition rate of 28.5MHz and output power of 5.5 mW was achieved with the high concentration GCMC, while a slightly higher output power of 6.9 mW was obtained using the low concentration GCMC mode locker.

Original language	English
Article number	061106
Number of pages	5
Journal	Applied Physics Letters
Volume	106
Issue number	6
DOIs	https://doi.org/10.1063/1.4908057
Publication status	Published - 11 Feb 2015

Bibliographical note

Access to Document

10.1063/1.4908057

Poor fluorinated graphene sheets carboxymethylcellulose polymer composite mode locker for erbium doped fiber laser
© 2015 AIP Publishing LLC
Accepted author manuscript, 515 KB

Cite this

@article{e01de6c1ec474504a7576ddc8a4c1c85,

title = "Poor fluorinated graphene sheets carboxymethylcellulose polymer composite mode locker for erbium doped fiber laser",

abstract = "We report poor fluorinated graphene sheets produced by thermal exfoliation embedding in carboxymethylcellulose polymer composite (GCMC) as an efficient mode locker for erbium doped fiber laser. Two GCMC mode lockers with different concentration have been fabricated. The GCMC based mode locked fiber laser shows stable soliton output pulse shaping with repetition rate of 28.5MHz and output power of 5.5 mW was achieved with the high concentration GCMC, while a slightly higher output power of 6.9 mW was obtained using the low concentration GCMC mode locker.",

author = "Chengbo Mou and Raz Arif and Lobach, {Anatoly S.} and Khudyakov, {Dmitry V.} and Spitsina, {Nataliya G.} and Kazakov, {Valery A.} and Sergei Turitsyn and Alex Rozhin",

note = "{\textcopyright} 2015 AIP Publishing LLC ",

year = "2015",

month = feb,

day = "11",

doi = "10.1063/1.4908057",

language = "English",

volume = "106",

journal = "Applied Physics Letters",

issn = "0003-6951",

publisher = "American Institute of Physics Publising LLC",

number = "6",

}

TY - JOUR

T1 - Poor fluorinated graphene sheets carboxymethylcellulose polymer composite mode locker for erbium doped fiber laser

AU - Mou, Chengbo

AU - Arif, Raz

AU - Lobach, Anatoly S.

AU - Khudyakov, Dmitry V.

AU - Spitsina, Nataliya G.

AU - Kazakov, Valery A.

AU - Turitsyn, Sergei

AU - Rozhin, Alex

PY - 2015/2/11

Y1 - 2015/2/11

N2 - We report poor fluorinated graphene sheets produced by thermal exfoliation embedding in carboxymethylcellulose polymer composite (GCMC) as an efficient mode locker for erbium doped fiber laser. Two GCMC mode lockers with different concentration have been fabricated. The GCMC based mode locked fiber laser shows stable soliton output pulse shaping with repetition rate of 28.5MHz and output power of 5.5 mW was achieved with the high concentration GCMC, while a slightly higher output power of 6.9 mW was obtained using the low concentration GCMC mode locker.

AB - We report poor fluorinated graphene sheets produced by thermal exfoliation embedding in carboxymethylcellulose polymer composite (GCMC) as an efficient mode locker for erbium doped fiber laser. Two GCMC mode lockers with different concentration have been fabricated. The GCMC based mode locked fiber laser shows stable soliton output pulse shaping with repetition rate of 28.5MHz and output power of 5.5 mW was achieved with the high concentration GCMC, while a slightly higher output power of 6.9 mW was obtained using the low concentration GCMC mode locker.

UR - http://www.scopus.com/inward/record.url?scp=84923886869&partnerID=8YFLogxK

UR - http://scitation.aip.org/content/aip/journal/apl/106/6/10.1063/1.4908057

U2 - 10.1063/1.4908057

DO - 10.1063/1.4908057

M3 - Article

AN - SCOPUS:84923886869

SN - 0003-6951

VL - 106

JO - Applied Physics Letters

JF - Applied Physics Letters

IS - 6

M1 - 061106

ER -

Poor fluorinated graphene sheets carboxymethylcellulose polymer composite mode locker for erbium doped fiber laser

Abstract

Bibliographical note

Access to Document

Other files and links

Fingerprint

Cite this