Influence of cutting parameters and tool wear on martensitic stainless steel surface integrity after a face milling process

Patricia Muñoz de Escalona, Paul G. Maropoulos

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Abstract

    Surface finish is one of the most relevant aspects of machining operations, since it is one of the principle methods to assess quality. Also, surface finish influences mechanical properties such as fatigue behavior, wear, corrosion, etc. The feed, the cutting speed, the cutting tool material, the workpiece material and the cutting tool wear are some of the most important factors that affects the surface roughness of the machined surface. Due to the importance of the martensitic 416 stainless steel in the petroleum industry, especially in valve parts and pump shafts, this material was selected to study the influence of the feed per tooth and cutting speed on tool wear and surface integrity. Also the influence of tool wear on surface roughness is analyzed. Results showed that high values of roughness are obtained when using low cutting speed and feed per tooth and by using these conditions tool wear decreases prolonging tool life.

    Original languageEnglish
    Title of host publicationASME 2009 Pressure Vessels and Piping Conference
    PublisherASME
    Pages1707-1716
    Number of pages10
    ISBN (Electronic)978-0-7918-3854-9
    ISBN (Print)978-0-7918-4369-7
    DOIs
    Publication statusPublished - 2009
    EventASME 2009 Pressure Vessels and Piping Conference - Prague, Czech Republic
    Duration: 26 Jul 200930 Jul 2009

    Publication series

    NameMaterials and Fabrication
    NumberParts A and B
    Volume6

    Conference

    ConferenceASME 2009 Pressure Vessels and Piping Conference
    CountryCzech Republic
    CityPrague
    Period26/07/0930/07/09

    Fingerprint Dive into the research topics of 'Influence of cutting parameters and tool wear on martensitic stainless steel surface integrity after a face milling process'. Together they form a unique fingerprint.

  • Research Output

    • 1 Conference contribution

    Empirical expression of tool wear when face milling 416 SS

    Muñoz de Escalona, P. & Maropoulos, P. G., 2009, ASME 2009 Pressure Vessels and Piping Conference. ASME, p. 1697-1705 9 p. PVP2009-77023. (Materials and Fabrication; vol. 6, no. Parts A and B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Cite this

    Muñoz de Escalona, P., & Maropoulos, P. G. (2009). Influence of cutting parameters and tool wear on martensitic stainless steel surface integrity after a face milling process. In ASME 2009 Pressure Vessels and Piping Conference (pp. 1707-1716). [PVP2009-77024] (Materials and Fabrication; Vol. 6, No. Parts A and B). ASME. https://doi.org/10.1115/PVP2009-77024