Reliability estimation of second life battery system power electronic topologies for grid frequency response applications

Nilanjan Mukherjee; Dani Strickland; Andrew Cross; William Hung

doi:10.1049/cp.2012.0353

Reliability estimation of second life battery system power electronic topologies for grid frequency response applications

Nilanjan Mukherjee, Dani Strickland, Andrew Cross, William Hung

Power Electronics, Machines and Power System (PEMPS) Group

Research output: Chapter in Book/Published conference output › Conference publication

Abstract

This paper is part of a project which aims to research the opportunities for the re-use of batteries after their primary use in low and ultra low carbon vehicles on the electricity grid system. One potential revenue stream is to provide primary/secondary/high frequency response to National Grid through market mechanisms via DNO's or Energy service providers. Some commercial battery energy storage systems (BESS) already exist on the grid system, but these tend to use costly new or high performance batteries. Second life batteries should be available at lower cost than new batteries but reliability becomes an important issue as individual batteries may suffer from degraded performance or failure. Therefore converter topology design could be used to influence the overall system reliability. A detailed reliability calculation of different single phase battery-to-grid converter interfacing schemes is presented. A suitable converter topology for robust and reliable BESS is recommended.

Original language	English
Title of host publication	6th IET international conference on power electronics, machines and drives (PEMD 2012)
Publisher	IEEE
Pages	1-6
Number of pages	6
Volume	2012
Edition	592 CP
ISBN (Print)	978-1-84919-616-1
DOIs	https://doi.org/10.1049/cp.2012.0353
Publication status	Published - 2012
Event	6th IET international conference on power electronics, machines and drives (PEMD 2012) - Bristol, United Kingdom Duration: 27 Mar 2012 → 29 Mar 2012

Conference

Conference	6th IET international conference on power electronics, machines and drives (PEMD 2012)
Country/Territory	United Kingdom
City	Bristol
Period	27/03/12 → 29/03/12

Bibliographical note

© 2012 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.

Keywords

BESS
frequency response
reliability
second-life batteries

Access to Document

10.1049/cp.2012.0353

Reliability Estimation of second life Battery System Power
© 2012 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
Accepted author manuscript, 286 KB

http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6242205

Cite this

@inproceedings{6bcf14032c5a4e7dbef0c8ff3ff1de29,

title = "Reliability estimation of second life battery system power electronic topologies for grid frequency response applications",

abstract = "This paper is part of a project which aims to research the opportunities for the re-use of batteries after their primary use in low and ultra low carbon vehicles on the electricity grid system. One potential revenue stream is to provide primary/secondary/high frequency response to National Grid through market mechanisms via DNO's or Energy service providers. Some commercial battery energy storage systems (BESS) already exist on the grid system, but these tend to use costly new or high performance batteries. Second life batteries should be available at lower cost than new batteries but reliability becomes an important issue as individual batteries may suffer from degraded performance or failure. Therefore converter topology design could be used to influence the overall system reliability. A detailed reliability calculation of different single phase battery-to-grid converter interfacing schemes is presented. A suitable converter topology for robust and reliable BESS is recommended.",

keywords = "BESS, frequency response, reliability, second-life batteries",

author = "Nilanjan Mukherjee and Dani Strickland and Andrew Cross and William Hung",

note = "{\textcopyright} 2012 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.; 6th IET international conference on power electronics, machines and drives (PEMD 2012) ; Conference date: 27-03-2012 Through 29-03-2012",

year = "2012",

doi = "10.1049/cp.2012.0353",

language = "English",

isbn = "978-1-84919-616-1",

volume = "2012",

pages = "1--6",

booktitle = "6th IET international conference on power electronics, machines and drives (PEMD 2012)",

publisher = "IEEE",

address = "United States",

edition = "592 CP",

}

Mukherjee, N, Strickland, D, Cross, A & Hung, W 2012, Reliability estimation of second life battery system power electronic topologies for grid frequency response applications. in 6th IET international conference on power electronics, machines and drives (PEMD 2012). 592 CP edn, vol. 2012, IEEE, pp. 1-6, 6th IET international conference on power electronics, machines and drives (PEMD 2012), Bristol, United Kingdom, 27/03/12. https://doi.org/10.1049/cp.2012.0353

Reliability estimation of second life battery system power electronic topologies for grid frequency response applications. / Mukherjee, Nilanjan; Strickland, Dani; Cross, Andrew et al.
6th IET international conference on power electronics, machines and drives (PEMD 2012). Vol. 2012 592 CP. ed. IEEE, 2012. p. 1-6.

Research output: Chapter in Book/Published conference output › Conference publication

TY - GEN

T1 - Reliability estimation of second life battery system power electronic topologies for grid frequency response applications

AU - Mukherjee, Nilanjan

AU - Strickland, Dani

AU - Cross, Andrew

AU - Hung, William

N1 - © 2012 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.

PY - 2012

Y1 - 2012

N2 - This paper is part of a project which aims to research the opportunities for the re-use of batteries after their primary use in low and ultra low carbon vehicles on the electricity grid system. One potential revenue stream is to provide primary/secondary/high frequency response to National Grid through market mechanisms via DNO's or Energy service providers. Some commercial battery energy storage systems (BESS) already exist on the grid system, but these tend to use costly new or high performance batteries. Second life batteries should be available at lower cost than new batteries but reliability becomes an important issue as individual batteries may suffer from degraded performance or failure. Therefore converter topology design could be used to influence the overall system reliability. A detailed reliability calculation of different single phase battery-to-grid converter interfacing schemes is presented. A suitable converter topology for robust and reliable BESS is recommended.

AB - This paper is part of a project which aims to research the opportunities for the re-use of batteries after their primary use in low and ultra low carbon vehicles on the electricity grid system. One potential revenue stream is to provide primary/secondary/high frequency response to National Grid through market mechanisms via DNO's or Energy service providers. Some commercial battery energy storage systems (BESS) already exist on the grid system, but these tend to use costly new or high performance batteries. Second life batteries should be available at lower cost than new batteries but reliability becomes an important issue as individual batteries may suffer from degraded performance or failure. Therefore converter topology design could be used to influence the overall system reliability. A detailed reliability calculation of different single phase battery-to-grid converter interfacing schemes is presented. A suitable converter topology for robust and reliable BESS is recommended.

KW - BESS

KW - frequency response

KW - reliability

KW - second-life batteries

UR - http://www.scopus.com/inward/record.url?scp=84864707628&partnerID=8YFLogxK

U2 - 10.1049/cp.2012.0353

DO - 10.1049/cp.2012.0353

M3 - Conference publication

SN - 978-1-84919-616-1

VL - 2012

SP - 1

EP - 6

BT - 6th IET international conference on power electronics, machines and drives (PEMD 2012)

PB - IEEE

T2 - 6th IET international conference on power electronics, machines and drives (PEMD 2012)

Y2 - 27 March 2012 through 29 March 2012

ER -

Reliability estimation of second life battery system power electronic topologies for grid frequency response applications

Abstract

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this